Flashback Reflective Tape User Guide

How to Apply Reflective Tape
Guia pas a pas

Flashback Tape – www.flashbacktape.co.uk

Eines que necessitareu

• Mild detergent or surface cleaner
• Draps nets o tovalloles de paper
• Cinta mètrica o regle
• Tisores o ganivet artesanal
• Plastic squeegee or old credit card
• Optional: edge sealer (for outdoor/vehicle use)

Pas 1: prepareu la superfície
Clean the surface thoroughly with mild detergent and water. Remove dust, grease, or wax, and dry completely. Ideal temperature: 10–30°C.

Step 2: Measure & Cut the Tape
Measure the area carefully. Cut tape to size, rounding off corners to prevent peeling.

Step 3: Peel & Position
Peel a small section of backing. Position the tape and apply slowly, removing more backing as you go.

Step 4: Apply Even Pressure
Use a squeegee or old credit card to press the tape down firmly, working from the centre outward.

Step 5: Seal the Edges (Optional)
For outdoor use, apply a thin layer of edge sealer along the tape borders.

Pas 6: Comprovacions finals
Check for bubbles or wrinkles. Allow 24 hours before washing or heavy exposure.

Application Tips by Surface

• Vehicles: Use ECE104-approved tape, apply along flat panels.
• Bicycles: Cut into smaller strips for frames and rims.
• Bollards: Use flexible glass bead tape on curved surfaces.
• DIY/Home: Highlight steps, doors, or bins with weather-resistant tape.

Errors comuns a evitar

• Applying to dirty or wet surfaces
• Stretching the tape during application
• Using sharp metal tools to press the tape
• Skipping measurement or rushing the process

Maintenance & Aftercare

Clean gently with mild soapy water, avoid harsh chemicals, and inspect edges regularly. Replace if the tape becomes faded or damaged.

www.flashbacktape.co.uk