Manual d'instruccions del controlador d'efecte Hall FUNLAB FF01

Controlador d'efecte Hall FUNLAB FF01

Acabatview

Firefly Pro Controller–Instruction Manual 

Especificació del producte

Funcionament on/off del controlador (en mode de commutació)

Connexió per cable

Connexió sense fil

1. Des del menú HOME, seleccioneu Controladors i, a continuació, Canvia el grip i l'ordre.
2. Press and hold Y + HOME for 3 seconds, and 4 LED lights flash quickly.
   The LED(s) are becoming stable, pairing finishes.
3. If no pairing for over 2.5 minutes, it shuts down by itself.
4. If paired and no operation for over 5 mins, shuts down by itself. (No movement on the sensor).

Funció despertador: Press the Home Button, and then the console in the sleep state can be woken up and connected again.

Mètode de funcionament i indicació LED (instrucció de connexió)

Mode de sincronització

• Combination Pairing: In the off state, press and hold the following key combination to enter the Pairing Mode.
• Android Mode: A+ HOME
  LED2 - LED3 parpelleja ràpidament mentre s'emparella, i LED2 - LED3 es manté encès mentre s'aparella correctament;
• Mode de canvi: Y + HOME
  LED1 – LED4 flash quickly while pairing, and the console automatically assigns when pairing is successful.
• PC Mode: B + HOME
  LED1 & LED4 flash quickly while pairing, and LEDl & LED4 keep on while pairing successfully;
• iOS Mode: B+ HOME
  Els LED1 i LED4 parpellegen ràpidament durant l'aparellament, i els LED1 i LED4 es mantenen encès mentre s'emparella correctament (sistema de suport: iOS 13.6 o superior/iPadOS 13.6 o superior);
• Steam Deck Mode: Press the “STEAM” Button on the left side of the console – “Settings” -“Bluetooth” to connect
  B + INICI
• Els LED1 i LED4 parpellegen ràpidament durant l'aparellament, i els LED1 i LED4 es mantenen encès mentre s'aparellen correctament.

Funció Turbo i AUTO TURBO

En qualsevol mode

• Els botons es poden configurar a la funció TURBO: Botó A/B/X/Y/L/R/ZL/ZR/D-pad
• (For the 1st time) Press the TURBO Button+ one of the function buttons to achieve the Manual TURBO Function (Press and hold to launch continuously)
• (For the 2nd time) Press the TURBO Button+ one of the function buttons to achieve the Automatic TURBO Function (Automatically continuous launch)
• (For the 3rd time) Press the TURBO Button+ one of the function buttons to clear the TURBO Function (Clear)
• Nota: Press and hold the TURBO Button for 5 seconds (if the Vibration intensity is not 0%, there will be a vibration cue ) to clear all TURBO Functions.

Ajust de velocitat TURBO (3 nivells)

• Mètodes d'ajust:
• Press TURBO Button+ “Shake L/R Joystick Up”, increase speed by 1 level;
• Press TURBO Button+ “Shake L/R Joystick Down “, reduce speed by 1 level;

Nivells de velocitat:

1. Llançar contínuament 5 vegades per segon (nivell 1);
2. Llançar contínuament 12 vegades per segon (nivell 2);
3. Llançar contínuament 20 vegades per segon (nivell 3);

Funció d'ajust de vibració

• Press the Motor Vibration Button on the back of the controller, and you can adjust the Motor Vibration Intensity. Vibration Intensity can be cycled in turn. There are 5 intensities, 100%, 75%, 50%, 25% and 0%.

Restabliment del maquinari del controlador

• There is a small hole on the back of the controller, and it is the Reset Button. After pressing it, the controller hardware will reset.

Reconnexió del controlador

• When the controller is pairing to the previous device, you only need to press the HOME Button after the controller is in standby, and it will pair to the previous device.

Indicadors de càrrega

• Charging in the OFF State: LED4 flashes slowly, and then turns off while being fully charged;
• Càrrega mentre està connectat a l'interruptor: la llum del canal corresponent parpellejarà lentament i, a continuació, es mantindrà encesa mentre estigui completament carregada.

Lighting Control Instruction (Light Button)

1. Light up the luminous pattern: Press the botó.
2. Change the Light Color: Press, botó.
   Colors will change each time you press the botó.
3. Change the Lighting Mode: Hold the, Initial Mode: Always-on
   1st time-click: breathing light mode
   2nd time-click: quick flash mode
   3rd time-click: vibration lighting mode
   Back to Always-on: turn off and then turn on the light.
4. Turn OFF the light: Hold el botó durant 5 segons.
   Turn ON the light: Press el botó.

Funció de macro i mapeig als botons de la part posterior

Funció de macro-Botons de macro

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Macro Buttons.
• Press and hold the ML Button and don’t loosen (4 LED lights turn on, entering programming), inputting the buttons you want to edit (up to 24 steps). The controller will have the vibration cue after loosening the ML Button and then pressing the XL Button to trigger the Macro Buttons. Buttons that Macro Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons and L/Rjoysti cks (can be used as a combo in the game).

Funció de mapatge: botons programables

• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening the MR Button and then pressing the XR Button to trigger the Programmable Buttons.
• Press and hold the MR Button and don’t loosen (4 LED lights turn on, entering programming), inputting the single button you want to map. The controller will have the vibration cue after loosening ML Button, and then pressing XL Button to trigger Programmable Buttons; and Buttons that Map ping Function could edit are A/B/X/Y/L/R/ZL/ZR/+/-/D-pad Buttons L/Rjoysti cks.

Nota:

1. Amb funció de memòria;
2. Press the MR/ML Buttons that set programming, and there is a vibration cue, and then you can clear the Macro and Mapping Function of the XR/XL Buttons.

Keylinker APP Instructions

1. Open the app store and search for “Keylinker” to download the APP.
2. Open the Bluetooth connection handle.
3. APP KEYLINKER BLE appears, click, and connect successfully.
4. Click the settings icon on the right to enter the settings page.
5. You can change the Button in the APP, set the lights, adjust the vibration, etc

Suport

• We promise to provide sustainable services for this controller. You can get more operational guidance support from our service channel and official web:
• Weblloc: www.funlabswitch.com
• Instagram: funlab_official
• Servei: support@funlabswitch.com
• Discòrdia: