generic JT01 Backup Camera User Manual

generic JT01 Backup Camera

Vehicle Camera Product Manual

Esquema de cablejat

Consell: If the monitor is an Android or Win-CE DVD player, please use the red trigger wire of the 6M video cable: A connects to B, C connects to the DC 12V reverse light power supply.

• If the monitor is a normal LED parking display, there is no need to connect the trigger wires.

About AHD Signal

How to check whether the Android unit supports an AHD camera?

1. Go to car settings
2. Configuració de fàbrica
3. Configuració inversa
4. Select AHD

If AHD is not supported, please cut the white wire.

Control del senyal

• Mirror control (Rear → Front)

About Signal Problems

1. Please check if all power cable plugs and 6M video cable is normal;
2. Please check if the power supply is DC 12V, or connect to car battery power supply and test it again;
3. Please check if the DVD trigger wire is connected to reverse light power properly;
4. If still not working, please connect the camera to AUX video input or TV to have a test.

Some Germany and American cars have output voltage interference after the engine is started. It will lead to the video signal output abnormal like screen flicker, stripes, can’t switch back to the screen when turn off the reverse gear and so on. Please buy extra rectifier relay for camera.

When the screen shows the black and white image:

1. Please change the monitor system format setting, NTSC or PAL;
2. Please check if the 6m video cable is normal—test with a new 6m cable.

Resolució de problemes

No camera image after connection:

• Check all power cable plugs and ensure the 6M video cable is normal.
• Confirm the power supply is DC 12V, or connect to the car battery power supply and test again.
• Verifiqueu el DVD trigger wire is connected to the reverse light power correctly (for trigger-connected monitors).
• If still not working, connect the camera to the Entrada de vídeo AUX o a TV per provar.

Abnormal video output after starting the engine (e.g., flickering/stripes, unable to switch back after reversing):

Some German and American cars may output voltage interference after engine start. The manual advises purchasing un additional rectifier relay per a la càmera.

Black and white image on screen:

• Change the monitor system format setting to NTSC or PAL.
• Comproveu el 6M video cable and test with a new 6M cable.