LTECH KMS1 Switch Module
Presentació del producte
- Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
- Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
- Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
- Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
- Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.
Especificacions tècniques
| Model | KMS1 |
|---|---|
| Tipus sense fil | Matèria sobre fil |
| Canvia de canal | 1 canals |
| Vol. Operatiutage | 100-240V~, 50/60Hz |
| Max. load parameters of the relay | Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac |
| Corrent de sobretensió de relé | 70A a 10 ms |
| Temperatura de treball | -25°C~50°C |
| Mida del producte | L45 × W45.5 × H20.5 (mm) |
| Pes del producte | 38 g |
| Normes | UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022 |
Imatges del producte
DIMENSIÓ
- Unitat: mm
- Mides: 45 x 45.5 x 20.5
Esquema de cablejat
- Mechanical Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
- Push Switch Wiring Diagram
Includes connections for load, line (L), and neutral (N).
Utilitzeu l'aplicació NFC Lighting
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.
Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.
Edita els paràmetres
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.
Add to Matter Platform Instructions
- This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
- To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.
Models compatibles
Configuració Example
- This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
- For iPhone models 15 and above, no Matter hub is required; they can be added directly.
Afegeix accessoris
- Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
- *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.
Dispositiu de control
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.
Funcions avançades
Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.
Restaura la configuració de fàbrica
Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.
Restabliment de l’engegada
En cas d'una potènciatage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.
Atenció
- La instal·lació i posada en marxa del producte l'ha de fer un professional qualificat.
- Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
- Una bona dissipació de calor allargarà la vida útil dels productes. Assegureu-vos una bona ventilació.
- Si us plau, comproveu si el volum de treballtagL'ús que s'utilitza compleix amb els requisits de paràmetres dels productes.
- El diàmetre del cable utilitzat ha de poder carregar els accessoris de llum que connecteu i garantir el cablejat ferm.
- Abans d'encendre els productes, si us plau, assegureu-vos que tot el cablejat sigui correcte en cas de connexió incorrecta que provoqui danys als accessoris de llum.
- Si es produeix un error, si us plau, no intenteu arreglar els productes per vosaltres mateixos. Si teniu cap pregunta, poseu-vos en contacte amb els vostres proveïdors.
Acord de garantia
Termini de garantia des de la data de lliurament: 2 anys. Els serveis de reparació o substitució gratuïts per problemes de qualitat es proporcionen dins dels períodes de garantia.
Exclusions de garantia
- Més enllà dels períodes de garantia.
- Qualsevol dany artificial causat per alt voltage, sobrecàrrega o operacions inadequades.
- Productes amb danys físics greus.
- Danys causats per catàstrofes naturals i força major.
- Les etiquetes de garantia i els codis de barres s'han danyat.
- No contract signed by our company.
Documents/Recursos
 |
LTECH KMS1 Switch Module [pdfManual del propietari KMS1 Switch Module, KMS1, Switch Module, Module |