Carrer M5STACKamp-S3Bat Embedded Core Module
Descripció
Stamp-S3Bat is an embedded core module integrated with power management. It utilizes the ESP32-S3-PICO-1-N8R8 as the main control core, supports 2.4GHz Wi-Fi, and comes with built-in 8MB Flash and 8MB PSRAM.
It provides 11 GPIO pins, an onboard battery power interface, and can be directly connected to an external 3.7V lithium battery for power supply.
With an efficient built-in PMIC and multi-level power control design, it supports power input and output control, as well as status monitoring for input voltage i bateria voltage. It supports external low-power wake-up. After the main controller shuts down and enters low-power sleep mode, it can be triggered to wake up via an external PMIC wake-up IO. The module features an onboard user button and a programmable RGB LED. With 2.54mm standard-pitch half-hole solder pads, it can be integrated into your applications through SMT, DIP, or other methods, helping developers quickly build IoT applications.
Especificacions
Inici ràpid
Preparació
- Visita la pàgina oficial d'Arduino weblloc i instal·leu l'IDE d'Arduino
https://www.arduino.cc/en/Main/Software - Afegeix el següent administrador de la junta URL a File → Preferències → Gestor de taulers addicionals URLs:
https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
- Obriu el Gestor de plaques, cerqueu "ESP32" i feu clic a Instal·la.
- After installation, select the board “ESP32S3 Dev Module”.
- Configure the following options. USB CDC On Boot: “Enabled”, PSRAM： “OPI PSRAM”, USB Mode: “Hardware CDC and JTAG"
Escaneig Wi-Fi
- Seleccioneu l'exampel programa “Examples” → “WiFi” → “WiFiScan”, trieu el port corresponent al vostre dispositiu i feu clic al botó de compilació i càrrega a la cantonada superior esquerra.
- Un cop finalitzada la càrrega, obriu el Monitor sèrie per a view Informació d'escaneig de Wi-Fi.
Escaneig BLE
- Seleccioneu l'exampel programa “Examples” → “BLE” → “Escaneja”, trieu el port corresponent al vostre dispositiu i feu clic al botó de compilació i càrrega a la cantonada superior esquerra.
- Un cop finalitzada la càrrega, obriu el Monitor sèrie per a view Informació d'escaneig BLE.
Avís de la FCC
Precaució de la FCC:
Qualsevol canvi o modificació no aprovat expressament per la part responsable del compliment podria anul·lar l'autoritat de l'usuari per fer servir l'equip.
Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents:
- This device may not cause harmful interference, andThiss device must accept any interference received, including interference that may cause undesired operation.
NOTA IMPORTANT:
Nota: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use,s and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorienta o reubica l'antena receptora.
- Augmentar la separació entre l'equip i el receptor.
- Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
- Consulteu el distribuïdor o un tècnic de ràdio/TV amb experiència per obtenir ajuda.
Declaració d'exposició a la radiació de la FCC:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated wita h minimum distance of 20cm between the radiator & your body.
Preguntes freqüents
Q: Can I power the Stamp-S3Bat using a different voltage bateria?
A: It is recommended to use a 3.7V lithium battery as the input power source for the Stamp-S3Bat to ensure optimal performance and compatibility.
Q: How many GPIO pins does Stamp-S3Bat provide?
A: Stamp-S3Bat provides a total of 11 GPIO pins for connecting external devices and sensors.
Q: What is the operating temperature range of Stamp-S3Bat?
A: The operating temperature range of Stamp-S3Bat is not specified in the user manual. It is advisable to operate within normal room temperature conditions for best results.
Documents/Recursos
 |
Carrer M5STACKamp-S3Bat Embedded Core Module [pdfGuia de l'usuari Stamp-S3Bat, Stamp-S3Bat Embedded Core Module, Embedded Core Module, Core Module |