RTX 8930 Wireless Dect Headset
ACABATVIEW
This manual explains how to operate the RTX SME VoIP DECT Headset (RTX8930) in generic mode, including power on/off, registration, basic call handling, volume control, and microphone muting.
Especificacions
- Model: RTX8930 headset
- Control de volum: Six volume steps (beeps indicate adjustments and limits)
- LED behavior (power/registration status): Blue LED blinks fast during initial signal detection/registration mode; after subscription it blinks with a 2-second interval
- Power-off key combination: Long-press AUX + VOL+ + VOL- for five seconds
Quick Setup & Use
- Enceneu: Premeu el botó AUX key. Wait for the blue LED to blink fast until a signal is detected; once subscribed, the voice prompt “Headset subscribed” plays and the blue LED changes to a 2-second interval.
- Initial registration: For first-time setup, switch the headset on; it enters registration mode automatically (blue LED blinking fast).
- Subsequent (re-)registration: Mantén premut HOOK OFF juntament amb VOL+ i VOL- until the blue LED starts blinking fast. (Note: the blue LED will not enter registration mode if the unit is cradled and charging.)
- Respon una trucada: Premeu HOOK OFF.
- Finalitzar una trucada: Premeu HOOK OFF de nou.
- Adjust volume during a call: Premeu VOL+ augmentar i VOL- per disminuir.
- Silenciar/activar el micròfon: Premeu MUT to toggle mute on and off.Headset Operations Manual
Sobre aquest document
This document describes the features and functionalities available in the RTX SME VoIP DECT Headset. We describe how to operate the headset without going into details about its mechanical features. The reference for features and operation in this manual is RTX generic mode.
PúblicAquesta guia està pensada tant per a usuaris quotidians com per administradors de sistemes.
AbreviaturesAls efectes d'aquest document, es consideren les abreviatures següents:
- DECT: Telecomunicacions sense fils millorades digitals
- IPEI: Identitat internacional d'equips portàtils
- MAC: Control d'accés als mitjans
- PBX: Intercanvi d'oficines privades
Referències/Documentacions relacionades
- [1]: How_To_Deploy_SME_Network_V1.3
- [2]: SME VoIP System Guide, Version 2.5
Història del document
| Revisió | Autor | Data d'emissió | Comentaris |
|---|---|---|---|
| 0.1 | TMS | 26-jul-2016 | Versió inicial. |
Marca registrada
| Nom del client | RTX | Wildix | SNOM | Strongbyte |
|---|---|---|---|---|
| Model núm. | RTX8930headset | WAIR-Headset | A190 | VCV2840 headset |
| HVIN | 8930V10 | WAIRV10 | 190V10 | 2840V10 |
| Marca registrada |
Funcionament bàsic
This section describes how to switch on and off the RTX8930 headset and how to register the unit on an RTX 8660 SME VoIP system.
How to Switch the Headset On/Off:
Apagant els auricularsTo switch the headset off, long-press the AUX clau juntament amb la VOL+ i VOL- keys (press and hold the three keys for five seconds). The blue LED will give a short blink before switching off.
Registration Initial Registration
Inscripcions posteriorsIf the RTX8930 headset has already been registered on the same or another base system and needs to be re-registered, the required action is to press and hold the HOOK OFF clau juntament amb la VOL+ i VOL- keys until the blue LED starts blinking fast.
NOTA: The blue LED will not start blinking in registration mode if the unit is cradled and charging. Please check the additional document via [2] for more information about terminal registration on a base system.
Operacions de trucades
- Trucada entrant As the headset receives an incoming call, a ringtone will be played back
- Respondre a una trucada entrant Per respondre una trucada entrant, premeu el botó HOOK OFF clau
- Rebutja una trucada entrant It is not currently possible to reject an incoming call
- Finalitzant una trucada To end an ongoing call, press the HOOK OFF clau
- Volum i silenciament It is possible to adjust the earpiece volume up or down during calls by pressing the VOL+ i VOL- keys, respectively. There are six volume steps. A beep is played back to indicate that the volume is adjusted. A higher frequency beep is played back when the volume cannot be adjusted further up or down.
- Silenciar el micròfon It is possible to mute the microphone during calls by pressing the MUT key. The microphone is unmuted by pressing the MUT key again. A voice prompt announcing “Mute on” is played back when mute is activated. A voice prompt announcing “Mute off” is played back when mute is deactivated.
Resolució de problemes
- Headset doesn’t enter registration mode when re-registering: If you are cradled and charging, the blue LED will not start blinking fast in registration mode. Remove it from the cradle/charging and try again.
- No confirmation after switching on: Després de prémer AUX, the blue LED should blink fast until a signal is detected. Once the headset locks onto a base, the voice prompt “Headset subscribed” should play and the LED should switch to blinking with a 2-second interval.
- Volume can’t be increased/decreased: The headset provides higher frequency beeps when the volume cannot be adjusted further up or down.
Documents/Recursos
 | 8930 Wireless Dect Headset |
Referències
- Manual d'usuarimanual.tools