Saitake STK-7052PD Multi Function Game Controller User Guide

Saitake STK-7052PD Multi Function Game Controller

Especificacions

• Model Number: STK-7052PD
• Product Name: Multi-Function Game Controller
• Tipus de connexió: Sense fil / amb cable
• Dimensions del producte: 155 x 110 x 60 mm
• Pes del producte: 305 g
• Power Supply: Built-in battery or USB host-powered
• Capacitat de la bateria: 1000 mAh
• Tipus de bateria: bateria de ions de liti
• Input Power Rating: DC5V, 1000mA
• Corrent de càrrega: 5V 600mA
• Temps de càrrega: 2.50 hores
• País de producció: Xina
• Frequency Band: 2.402 to 2.480Mhz
• Transmission Power: Less than 3dBm EIRP
• El disseny i les especificacions estan subjectes a canvis sense previ avís.

Design and specifications are subject to change without notice. Please read the following precautions before use

• This product contains inter changeable parts. Keep out of reach of children under 3 years old.
• Do not use the product near open flames.
• No exposar el producte a la llum solar directa ni a altes temperatures.
• No col·loqueu el producte en ambients humits o polsegosos.
• No deixeu caure el producte ni el sotmeteu a impactes forts.
• Do not touch the USB port directly, as it may cause malfunction.
• No doblegueu ni estireu el cable per la força.
• Netejar amb un drap suau i sec.
• No utilitzeu gasolina, diluent ni altres dissolvents químics.
• No desmunteu, repareu o modifiqueu el producte vosaltres mateixos.
• Do not use the product for purposes other than its intended use. We arnot responsible for any accidents or damage caused by misuse.
• No mireu directament el feix de llum. Podríeu fer mal als ulls.

Contingut del paquet 

Instrucció de components

1. Pantalla de visualització
2. Botó -/SELECT
3. Stick esquerre (LS)
4. Tira de llum RGB
5. Botó TURBO
6. D-Pad
7. Botó HOME
8. Botó +/INICI
9. Botons ABXY
10. Tira de llum RGB
11. Botó de captura de pantalla PrtSc
12. Stick dret (RS)
13. Botó ON/OFF
14. Botó L1
15. Botó L2
16. Port de càrrega i dades TIPUS C
17. Botó R1
18. Botó R2
19. Cable de càrrega i dades
20. Nivell de disparador esquerre
21. Botó enrere esquerre
22. Conector d'auriculars
23. Nivell de disparador dret
24. Botó enrere dret
25. Port de càrrega
26. Restableix el forat

Power On / Off / Power 

• Power On : Move the toggle switch to the ON position. The RGB light bar on the game controller will turn on, and the display screen will show the startup animation before entering the standby reconnecting interface.
• Power Off: Move the toggle switch to the OFF position. The RGB light bar on the game controller will turn off, and the controller will power off after the display screen shuts down.
• Mode d'estalvi d'energia:
  1. If pairing is not successfully completed within 2 minutes in power-on pairing mode, the controller will shut down automatically.
  2. If reconnection is not successfully completed within 60 seconds in power-on reconnection mode, the controller will shut down automatically.
  3. If there is no operation on the controller for more than 15 minutes in successfully connected mode, the controller will also shut down automatically.

Mètode de càrrega

1. Connect the charging base with A-C cable to AC adapter.
2. Put the controller to charging base, the controller will start charging automatically.
   • indicate the charging status
   • indicate the charged full
3. Charging specificate:
   • Type-C port: 5V 600mA Charging Base: Input: 5V 1A Max Output: 5V 600mA

Mètode de connexió

1. Android \ iOS System Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 3 second into “Setting panel”, select “Connected Mode”, select “PHONE” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Enable Bluetooth on your device, scan and find the Bluetooth name (Xbox Wireless Controller), then tap to connect the controller.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller; it will reconnect automatically.
2. PC System Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button for 5 seconds into “Setting panel”, select “Connected Mode”, select “PC” and confirm with press A button; the controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Enable Bluetooth on your device, scan and find the Bluetooth name (Xbox Wireless Controller), then tap to connect the controller.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon to indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically
3. Receiver Connecting: For PC Computer
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 5 second into “Setting panel”, select “Connected Mode”, select “Receiver” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 5 second into “Setting panel”, select “Pair” and confirm with press A button, the system will automatically turn to the pairing interface.
   3. Insert the receiver into the USB port of computer. Press and hold the pairing button on the receiver for about 1 second.The indicator light on the receiver will flash rapidly wait for connect.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.
4. Wired Connect PC Controller Mode:
   1. Insert the C connector of the A-C cable into the controller’s data port and the A connector into a USB port on the PC computer.
   2. Move the toggle switch to the ON position. The RGB light bar on the game controller will turn on, and the display screen will show the startup animation before entering the standby reconnecting interface.
   3. After successful connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   4. Press the -/SE & +/ST both buttons to switch X-Input to D-Input alternately.
5. N-Switch Console Connecting:
   1. Mode Chosen: After powering on the controller, press and hold the HOME button with 5 second into “Setting panel”, select “Connected Mode”, select “SW” and confirm with press A button, controller will reboot automatically.
   2. Into Pairing Status: Press and hold the HOME button with 3 second into “Setting panel” while controller power on, select “Pair” and confirm with press A button, the controller will automatically turn to the pairing status wait for connect.
   3. Turn on your SWITCH console, go to Controllers → Change Grip/Order → Pair New Controllers.
   4. After successful Bluetooth connection, the controller will vibrate for 1 second as a prompt and display the icon indicate pairing successful.
   5. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.
6. P4 Controller Mode:
   1. After powering on the controller, insert the C connector of the A-C cable into the controller’s data port and the A connector into a USB port on the PS4 console.
   2. Press the HOME button to pair. The controller vibrates for 1 second to indicate successful pairing.
   3. Unplug the data cable and press the HOME button shortly to reconnect via Bluetooth.
   4. Reconnect: Press the HOME button to power on controller, it will reconnect automatically.

Més funció

RGB Lighting Switch

1. While charging with the charge base, touch the icon to close the rgb lighting.
2. How to change RGB lighting effect:
   1. After powering on the controller, press and hold the HOME button with 3 seconds into “Setting panel”, select “lighting pattern”, then you can select the rgb lighting style and confirm with press A button, the rgb light will changed automatically.

Restableix

1. If the controller buttons become unresponsive / stuck, use a small object such as a SIM ejector tool to press the Reset button located in the small round hole (Reset hole) on the back of the controller. Alternatively, switch the controller to the OFF position to turn it off.
2. With the controller powered on, press and hold the HOME button to enter the menu. Select ” Reset “, then press and hold the A button for 3 seconds. The controller will restart, TURBO and MACRO settings will be erased, volume and brightness will be restored to default, and pairing information will be cleared.

Instruccions de calibratge del controlador

• With the controller powered off, press and hold the “Y” and “B” buttons. While holding, slide the switch to the ON position to power it on. The red and blue lights will flash alternately at a rate of 2 times per second, indicating calibration mode.
• Rotate both the left and right sticks 2 to 3 full circles with normal strength and speed. Press bothtrigger buttons (L2 / R2) fully 2 to 3 times in linear mode.Place the controller flat on a surface, then press the “+ / ST” button. Once the light stops flashing andthe controller returns to the main screen, the calibration is complete.

Changeable Thumb Sticks

• The default thumb sticks on the game controller feature a short travel height (4.5mm). The package includes an additional pair of tall thumb sticks (7.0mm) as a gift, and they are inter changeable.
• Replacement Method: Pull the original thumb stick upward firmly to remove it, then align the new thumb stick with the slot and press down to install.

Declaració de la FCC

Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents:

1. Aquest dispositiu no pot causar interferències perjudicials i
2. aquest dispositiu ha d'acceptar qualsevol interferència rebuda, incloses les interferències que puguin provocar un funcionament no desitjat.

NOTA 1:
Aquest equip s'ha provat i s'ha comprovat que compleix els límits per a un dispositiu digital de classe B, d'acord amb la part 15 de les normes de la FCC. Aquests límits estan dissenyats per proporcionar una protecció raonable contra interferències nocives en una instal·lació residencial. Aquest equip genera, utilitza i pot irradiar energia de radiofreqüència i, si no s'instal·la i s'utilitza d'acord amb les instruccions, pot causar interferències perjudicials a les comunicacions de ràdio. Tanmateix, no hi ha cap garantia que no es produeixin interferències en una instal·lació concreta. Si aquest equip provoca interferències perjudicials a la recepció de ràdio o televisió, cosa que es pot determinar apagant i encenent l'equip, es recomana a l'usuari que intenti corregir la interferència mitjançant una o més de les mesures següents:

• Reorienta o reubica l'antena receptora.
• Augmentar la separació entre l'equip i el receptor.
• Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
• Consulteu el distribuïdor o un tècnic de ràdio/TV amb experiència per obtenir ajuda.

NOTA 2:
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Declaració de conformitat de la UE

• Hereby declares that the product is in conformity with the essential requirements and other relevant provisions of the following EU directives and regulations:
• Directiva d'equips de ràdio (RED) 2014/53/UE
• Directiva EMC 2014/30/UE
• RoHS Directive 2011/65/EU and (EU) 2015/863 – compliant with Restriction of Hazardous Substances Directive
• REACH Regulation (EC) No. 1907/2006 – compliant with Registration, Evaluation, Authorisation and Restriction of Chemicals
• The product complies with the applicable essential requirements of health, safety, and environmental protection as set out in the above directives.
• The CE marking affixed to this product signifies its compliance with all applicable EU legislation.
• Manufacturer: SHENZHEN SAITAKE ELECTRONIC CO., LTD
• Address: Room 301, Huayong Building ， No. 1 Dongshangang Road, Gushu Community, Xixiang Subdistrict, Bao’an District, Shenzhen 518000 Guangdong Province, China Date: 26/05/2026

Resolució de problemes

Mode d'estalvi d'energia

• If pairing is not successfully completed within 2 minutes in power-on pairing mode, the controller will shut down automatically.
• If reconnection is not successfully completed within 60 seconds in power-on reconnection mode, the controller will shut down automatically.
• If there is no operation on the controller for more than 15 minutes in successfully connected mode, the controller will also shut down automatically.

Torna a connectar

• Press the HOME button to power on the controller; it will reconnect automatically.