SINOTIMER STC-916VA Temperature Controller

Acabatview

The external temperature detector can detect the temperature. Set the start and stop temperature. Cycle timing, start and stop time, timer switch. It is widely used in intelligent control, such as carbon heating, aquaculture, greenhouse, home life, and other places.

Controls
Four buttons + Reset button: SET, FUN, UP, DOWN

Mode de control de temperatura

• Premeu el botó SET: Temperature control mode, Timing mode F01-F04
• Mode de calefacció: Start Temperature ON < Stop Temperature OFF
• Measured Temperature lower than Start Temperature ON, the connected device is ON.
• Measured Temperature over Stop Temperature OFF, the connected device is OFF.

Mode de refrigeració: Start Temperature ON > Stop Temperature OFF

• Measured Temperature over Start Temperature ON, the connected device is ON.
• Measured Temperature lower than Stop Temperature OFF, the connected device is OFF.

Mode horari

Press the FUN key to display F01, F02, F03, and F04 timing modes. Press the SET key to enter the setting state, and the corresponding contents are displayed blinking, waiting for the setting. Press the UP or DOWN key to adjust the blinking bit value. Press the FUN key to save and exit the Settings.

Modes de pantalla LCD

• F01: Cycle Switch Mode – Start time delay ON, stop time delay OFF, and the Cycle timing.
• F02: Delay ON Mode – Now time is OFF, delayed (start time) ON.
• F03: Delay OFF Mode – Now time is ON, delayed (stop time) OFF, countdown completion, Turn off the output and exit the run.
• CD ON, CD OFF Switch Mode – Now time is OFF, delayed (start time) ON, after starting delayed (stop time) OFF, stop the time to finish the countdown, close out the output and exit the operation.

Notes

• En mode de control de temperatura: Blinking is based on the mode of heating or cooling.
• Under timing mode: Current running mode ON/OFF Blinking, Time symbol: blinking, meanwhile, time is running. After the start of the machine, Relay suction when running to ON, socket output indicator light, Relay shutdown at OFF light indicator.

Premeu el botó FUN

1. Temperature mode: Press the FUN button, set up the start temperature and stop the temperature. The Temperature range is -40°C ~120°C. 2.2 Timing mode (F01-F04)
2. Press the FUN button, set up start hours, minutes/ stop hours, minutes, setrange of 0~99 hours 59 minutes.
3. Estat d'execució: permet l'ajust de temperatura/hora mitjançant el botó FUN.
4. Manteniu premut el botó FUN durant 2 segons per iniciar/aturar el temps actual;

Premeu el botó UP/DOWN

1. En el moment del centelleig numèric. Es realitza un ajust numèric segons el botó UP i el botó DOWN.
2. According to a UP button or DOWN button plus / minus 1, the long time value is automatically added and reduced
3. En estat sense execució, al mateix temps, premeu el botó UP i el botó DOWN 2 segons per restaurar la configuració de fàbrica.

Correcció de la temperatura
Long press the FUN button during power on, and the system will automatically enter the temperature correction mode.

1. Long press FUN button, real time temperature calibration after 2 seconds. LCD first row display“CALIBRATION” and real time temperature. Correction value of LCD second row scintillation display. Adjust the correction value according to UP and DOWN button ( According to the adjusted calibration value, thermal time temperature changes accordingly.).
2. Real time temperature correction range: – 9.9 °CA~9.9 °C

• Funció de memòria
  Tota la configuració actual es desarà després d'apagar-la.
• Prova de fàbrica
  Reset the factory setting by pressing the UP & DOWN buttons for 3 seconds. The screen will display for one second, restoring the factory settings.

Especificacions

Interval de visualització de temperatura	– 40 ~120°C
Precisió de visualització de la temperatura	0.1 °C
Precisió	+/- 1% MAX
Precisió del temps	1 minut
Voltage	120 VCA
Corrent màxima de treball	15A

Preguntes freqüents

How do I set the start and stop temperature?

Press the SET button to enter temperature control mode and adjust using the UP/DOWN buttons.

Què passa si s'apaga el corrent?

The device has a memory function, so all current settings will be saved after power off.

Documents/Recursos

SINOTIMER STC-916VA Temperature Controller [pdfManual d'usuari STC-916VA Temperature Controller, STC-916VA, Temperature Controller, Controller

Referències

• Manual d'usuari