TREEGERS Growcast Lighting Controller

treegers.com

BENVINGUTS
Gràcies per la compraasing a Treegers Grow­cast. Powered by Teles These products are designed in the UK are made using the latest electrical componentry and manufacturing technologies. Our aim is to help growers to save energy and grow better plants with reliable, research driven Iighting technologies.

Detalls del producte

1 x Treegers Growcast Controller:

3 x Cable Adapters:

USB-A to USB-C (2m)

Growcast to RJll adapter (30cm) Type 1 and Type 2
For the USBC cable, you will need a standard Sv USB power plug.

Instal·lació

Make sure your grow light is powered off before plugging in your Treegeers Growcast. Connect your Treegers Growcast into the “Signal In/Out” port on your chosen grow light. Most grow lights can self power the Growcast via a 12v supply from the “Signal In/Out” port. Some grow lights will require an external power source via USB-C (cable provided).

Grow Light Powered Setup 

USB-C Powered Setup 

Informació tècnica

• Compatible amb molts accessoris d'il·luminació LED i HPS dels principals fabricants
• Establiu sense fil els nivells de llum exactes amb Precise PPF™
• Controleu els valors de PPF per a cada setmana de creixement
• Programeu un calendari d'encesa i apagat de 24 hores per a diferents cicles de creixement, substituint la necessitat de contactors i temporitzadors
• Afegiu una funció opcional de sortida / posta de sol als horaris
• Daisy chain up to 50 lights to a single Growcast TM controller
• Securely connect and control multiple Growcast TM control­lers together on the Teles Mesh smart phone app for Android and iOS

Interfície de connexió:	Connector de bloqueig M12
Interfície d'usuari:	Smart-p one app or manual control via touch sensor
Interval d'atenuació:	10-100% i atenuació per apagat
Protocol d'atenuació:	1-l0v
Potència d'entrada:	Cable USBC o subministrament de 12 V (des del controlador LED)
Tecnologia sense fils:	Telos Mesh 5.3
Aplicació de control:	Telos (Android) Telos Mesh (iOS)
App availability:	Android i iOS
Protecció d'entrada:	IP65 (quan USBC no connectat)
Dimensional dades:	32 x 32 x 22 mm
Pes:	27 g
Longitud del cable:	300 mm
Garantia del fabricant:	2 anys

Compatibilitat

Treegers Growcast is compatible with many different grow lights from a wide range of manufacturers.
Visit the Telos weblloc a www.teloslighting.co.uk/growcast for a full list of compatible fixtures. The Growcast has been tested with all models listed on the compatibility list to ensure that they function correctly with the Growcast. Treegers accepts no liability for damage to the Growcast, grow lights or property that arises from using the device with a light that is not listed on the compatibility list.

Accepted Ports:

Hi ha un adaptador disponible per a connexions de bloqueig de rosca M12.

1 x Superfície de muntatge d'acer: 

The 3M material is pre-mounted to the back of the Steel mounting plate. Take care to only remove the red plastic release tape and not the black foam adhesive.

Inclòs a la caixa

• 1 x Treegers Growcast controller
• 1 cable USB-C de 2 m
• 1 x RJll Adapter [Type l]
• 1 x RJll Adapter [Type 2]
• 1 x Placa de muntatge d'acer
• 1 x manual d'instruccions
• 1 x Manual Telos Mesh

Adaptador RJ11
Different grow light manufacturers use different “Signal-in” ports for their lighting designs. Traditionally most grow lights have been designed with an RJ11 port however many newer grow light designs use a waterproof M12 push lock connector. The Treegers Growcast has been designed with the future in mind with the M12 connector being the native option, howe­ver, we have also included two RJ11 adapters (Type 1 and Type 2) to increase compatibility with even more fixtures.

Muntatge
The Treegers Growcast can be mounted to the side of the grow light using the included self-adhesive pad or to a suitable alternative surface using the internal magnet.

Imant
El Growcast té un potent imant permanent integrat al producte casing to allow it to be mounted onto other mag­netic materials such as the included steel mounting plate.

Placa de muntatge
Utilitzeu el coixinet adhesiu per connectar la placa de muntatge a la ubicació desitjada. El growcast es connectarà magnèticament a la placa de suport i es bloquejarà en posició amb agulles d'ubicació.

Accessoris

Fixture Linking/Daisy-chaining
A single Treegers Growcast can control multiple connected lights by linking the fixtures together. This means that the PPF setting and schedule will be synced across all the lights which are wired together. Install the Growcast into the dimming input port of the fixture as described on page 6 .. Then use the fixture linking cables recommended or included by the manu­facturer to link from the Signal Output port of the first fixture to the Signal Input port of the second fixture and so on. Always refer to the original manufacturer’s recommendations when linking fixtures together.

Fixture Linking/Daisy-Chaining Cables
There are several different types of fixture link cables availab­le, allowing users to link multiple fixtures together for single channel dimming. Always follow original manufacturers recommendations when selecting which cables to use.

Push-lock M12 to push-lock M12

Push-lock M12 to push-lock M12

Twist-lock M12 to twist-lock M12
Example setup: In order to link 5 lighting fixtures to a single Growcast, you will need 4 x linking cables.

Adaptadors d'il·luminació alternatius
The included Growcast RJ11 (Type 1 and Type 2) adapters allows you to connect the Growcast to most major lighting brands. However, some manufacturers use non standardised connectors for their dimming ports. If you find that you are unable to connect your Growcast to your lighting fixture, please contact support@treegers.com to check on the availability of compatible adapters.

Entendre el controlador tàctil
The Treegers Growcast has a touch sensor which is used to change the mode or active setting. The touch sensor is acti­vated by pressing the centre of the green Treegers logo on the Growcast.

Comprensió del LED d'estat

Premeu el sensor tàctil per recórrer els paràmetres de sortida de llum preestablerts. El LED d'estat a la base de la tapa canviarà de color en funció del mode actual.

• Status LED Colour:  Meaning
• Blue Flashing: Bluetooth ready to pair
• Blue: Bluetooth mode (paired)
• Verd: en espera
• Yellow: 25% Output intensity
• Orange: 50% Output intensity
• Deep orange: 75% Output intensity
• Red: 100% Output intensity
• Purple: Network lock mode

Activació del mode Bluetooth

Activeu el mode Bluetooth abans d'intentar afegir els vostres llums a l'aplicació Telos Mesh.

Pas 1
Passeu al mode Bluetooth prement el sensor tàctil repetidament fins que el LED d'estat es torni blau. Espereu almenys 5 segons abans d'intentar connectar-vos.

Pas 2
The status LED will flash blue and the light will start broadcasting the Bluetooth adver­tising signal.

Despertar el Growcast del son
Wake your Growcast from sleep. To prevent accidental chan­ges, the Growcast will go to sleep after 15 seconds of inactivi­ty.

Pas 1
Mantingueu premut el sensor tàctil durant 3 segons. El LED d'estat s'atenuarà i el sensor tàctil es reactivarà.

Restablir el Growcast

El Growcast es pot restablir completament mitjançant el sensor tàctil del controlador. El restabliment s'esborrarà qualsevol configuració de connexió i horaris desats.

Pas 1
Primer, desperta el Growcast del son. Consulteu la pàgina anterior.

Pas 2
Manteniu premut el sensor tàctil durant 3 segons. El LED d'estat parpellejarà en vermell.

Pas 3
Deixeu anar i, a continuació, premeu i manteniu premut el sensor tàctil de nou durant 3 segons més. I alliberar.

Completa
Tota la llum (lamp secció) hauria de parpellejar brillantment 3x.

Distàncies de connexió sense fil 

Recommended distance between Growcast to smart device.

Recommended distance between Growcast to Growcast. When connecting and controlling the network with a smart device, we recommend that you are in the same room or within 10 meters of the Growcast to ensure the strongest connection.

Documents/Recursos

TREEGERS Growcast Lighting Controller [pdfManual d'usuari Growcast Lighting Controller, Growcast, Lighting Controller, Controller

Referències

• Manual d'usuari