ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller User Manual

ZigBee 3.0 Wireless Push Button Smart Scene Switch Controller

Informació del producte

Característiques

• Es pot controlar amb un telèfon iOS/Android
• Support “Smart Life” and “Tuya Smart” APP
• Voice control: Compatible with Alexa and Google home T mall Genie or Xiaodu speakers
• Funció de temporització: Encès / apagat automàtic amb funció de temporització
• Protecció de sobrecàrrega per reemplaçar fàcilment els interruptors mecànics tradicionals (necessita neutral)
• Escena intel·ligent
• Grup de dispositius

Informació de seguretat

Risk of electric shock: Electricity can cause personal injury and properly damage if not handled properly. If you are unsure of any part of these instructions, seek professional help from a qualified electrician.

Instal·lar

Avís:

• Assegureu-vos que l'alimentació de l'interruptor estigui apagada abans de fer el cablejat.
• Neutral wire is required. Verify that the wall box contains a neutral wire (usually white). If the wall box does not have a neutral wire, try another location in the home or call a professional electrician to install the switch.
• Els colors dels cables indicats en aquest manual són els colors habituals i poden variar en algunes cases.
• Make sure the wire conductors are securely attached to each screw.
• Assegureu-vos que el senyal Wi-Fi sigui estable i funcioni correctament abans de fer el cablejat.
• Si no teniu cap experiència en cablejat, truqueu a un electricista professional.

Primer pas:

• Apagueu l'interruptor i comproveu la potència amb un provador elèctric.
• Assegureu-vos que l'interruptor estigui apagat abans de fer el cablejat.

Segon pas:

• Remove existing wall panels; turn on power at breaker and use electrical tester to check which wire is the line; the tester will beep when near the line.
• Turn off the power at the circuit breaker; if there is a power outage, use an electrical tester, pull the existing switch out; mark the wiring and other wires; disconnect the power with pliers and remove the wires from the existing switch.
• Connect the switch wires to the wall box with the wire conductors according to the wiring diagram below.
• Tercer pas: Install the switch using the screws provided and snap the wall plate onto it.
• El quart pas: Torneu a encendre l'alimentació a l'interruptor i, a continuació, enceneu els llums.

Esquema de cablejat

The Live wire is connected to the “L” terminal, The Neutral wire is connected to the “N” terminal, Lighting wire is connected to “L1, L2, L3” terminals.

1. Gang switch lighting wire connection: “L1” terminal
2. Gang switch lighting wire connection: “L1,L2” terminals
3. Gang switch lighting wire connection: “L1,L2,L3” terminals

Afegeix un dispositiu

Add device to “Smart Life” or “Tuya Smart” APP

1. Step 1: Download and install the “Smart Life” or “Tuya Smart” APP: Scan the QR code below
   
2. Step 2: Enter the phone settings option, turn on the Bluetooth and WiFi functions, and turn on the product at the same time
3. Step 3: Open the Smart Life APP, register and log in your account, if you have a Smart Life account, just log in.
4. Step 4: Power on after the wiring is completed, the device is powered on by default, press and hold the touch wall switch button for about 8, until the WiFi blue LED flashes quickly, enter the network configuration mode
5. Step 5: Enter the App, click the “+” at the top right of the page to enter the network connection page.
6. Step 6: Make sure your device’s light is blinking quickly(2 times per second) tap to proceed to the next steр.
7. Step 7: Enter your WiFi and password
8. Step 8: Name your device.
9. Step 9: When the WiFi LED is on, the device is online.
   Preneu el control ara!

How to use smart speakers to control devices, such as Amazon Alexa, Google Assistant or T mall Genie?
Open the Smart Life app to enter the “Me” view and find the user Quide for “Me” view and find the user guide the corresponding smart speaker

【Note: Before using the smart speaker, please log in to your account on Amazon Alexa Google Assistant, or T mall Genie.]

Introduction of RF remote control operation

Packaged products are paired at the factory and do this wirelessly. If you need to add or replace the remote control switch, please refer to the following steps

Mètode d'aparellament
Press and hold the touch wall switch button for about 3 seconds. The red LED indicator lights up to enter the RF433 pairing mode. At this time, press the RF433 remote control switch a few times and the indicator light flashes off. The switch is controlled and paired successfully.

Mètode de neteja de codi

Long press the touch wall switch button for 5 seconds until the red LED indicator flashes 3 times, the code is cleared successfully.