Keeson RC309A Remote Control User Manual

Keeson RC309A Remote Control

Especificacions

• Nom del producte: CONTROL A DISTANCIA
• Model: RC309A
• Entrada: 2 piles AAA 1.5V
• Fabricant: Keeson Technology Corporation Limited
• Païs de manufactura: Xina

Instruccions d'ús

Figure 1 illustrates the buttons on the remote control.

1. Dirigir
   Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Cap avall
   Press and hold the HEAD DC NNN button of the remote, the head actuator moves in, and stops when released.
3. Peu amunt
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Peu avall
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5.  Pis
   lick FLAT button, the bed goes flat. Stop when you click any button during the process of going flat.
6. Cap de massatge 
   lick MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. Botó ZG
   Click the ZG button, the actuator moves to the ZG position, stop when clicking any button during the movement.
8. Memory Favorite position
   licking once will move the app to the Favorite position; long-pressing to memorize the position. The backlight will flash twice, and releasing the button will continue the flashing.
9. Bloqueig
   Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. During the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

Informació del producte

• Product Name: REMOTE CONTROL
• Model: RC309B
• Input: 2 x Battery AAA 1.5V
• Fabricant: Keeson Technology Corporation Limited
• País de fabricació: Xina

Avís de la FCC:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can adiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorienta o reubica l'antena receptora.
• Augmentar la separació entre l'equip i el receptor.
• Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
• Consulteu el distribuïdor o un tècnic de ràdio-TV amb experiència per obtenir ajuda.

Qualsevol canvi o modificació no aprovat expressament per la part responsable del compliment podria anul·lar l'autoritat de l'usuari per fer servir l'equip. Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents:

1. Aquest dispositiu no pot causar interferències perjudicials,
2. Aquest dispositiu ha d'acceptar qualsevol interferència rebuda, incloses les interferències que puguin provocar un funcionament no desitjat.

Informació d'exposició a RF

S'ha avaluat que el dispositiu compleix els requisits generals d'exposició a RF. El dispositiu es pot utilitzar en condicions d'exposició sense restriccions.

Avís RSS ISED:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• Aquest dispositiu no pot causar interferències.
• This device must accept any interference, including interference that mav cause undesired operation of the device.

Resolució de problemes

If the remote control is not functioning as expected:

• Comproveu les bateries: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• Bloqueig per a nens: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• Interferència: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

Preguntes freqüents

Q: What type of batteries does the RC309A remote control use?
A: The remote control requires 2 x AAA 1.5V batteries.

Q: How do I stop the bed from moving once I’ve pressed a position button?
A: For continuous movements like Head Up/Down or Foot Up/Down, release the button to stop. For preset positions like Flat or ZG, clicking any button during the movement will stop the process.

Q: What does it mean if the red light flashes for 2 seconds when I press a button?
A: This indicates that the child lock feature is currently engaged. You will need to disengage the child lock to use the remote’s functions (refer to section 1.7).

P: Puc modificar el comandament a distància?
A: Any changes or modifications not expressly approved by the manufacturer could void your authority to operate the equipment and are not recommended.