Keeson RC309B Remote Control User Manual

Keeson RC309B Remote Control

Especificacions

• Nom del producte: CONTROL A DISTANCIA
• Model: RC309B
• Entrada: 2 x Battery AAA 1.5V
• Fabricant: Keeson Technology Corporation Limited
• Manufacturing Country: Xina

Instruccions d'ús

Figure 1 illustrates the buttons on the remote control.

Dirigir

1. Press and hold the HEAD UP button of the remote, the head actuator moves out, stop when released.
2. Cap avall
   Press and hold the HEAD button of the remote, the head actuator moves in, stop when released.
3.  Peu amunt
   Press and hold the FOOT UP button of the remote, the foot actuator moves out, stop when released.
4. Peu avall
   Press and hold the FOOT button of the remote, the foot actuator moves in, stop when released.
5. Pis
   Click the FLAT button, the bed goes flat, stop when you click any button during the process of going flat.
6. Cap de massatge
   Click the MASSAGE HEAD button, head massage motor switches massage intensity, massage intensity switches among 0-1-2;
7. Botó ZG
   Click the ZG button, the actuator moves to the ZG position, stops when clicking any button, dilling the movement;
8. Memory Favorite position
   Clicking once will move the app to the Favorite position; long press to memorize the position, the backlight will flash twice, and releasing the button will continue the flashing.
9. Memory Fvorite2 position
   Clicking once will move the app to the Fav01ite2 position; long press to memorize the position, the backlight will flash twice, and releasing the button will continue the flashing.
10. Bloqueig
    Press and hold the child lock button until the red light flashes twice, indicating that the child lock is successfully engaged. Dialing the locking process, pressing any button will cause the red light to flash for 2 seconds, indicating that the lock is engaged.

FCC:

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to tlY to conect the interference by one or more of the following measures:

• Reorienta o reubica l'antena receptora.
• Augmentar la separació entre l'equip i el receptor.
• Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
• Consulteu el distribuïdor o un tècnic de ràdio-TV amb experiència per obtenir ajuda.

Qualsevol canvi o modificació no aprovat expressament per la part responsable del compliment podria anul·lar l'autoritat de l'usuari per fer servir l'equip. Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents:

1. Aquest dispositiu no pot causar interferències perjudicials,
2. This device must accept any interference received, including interference that may cause undesired operation to accept any interference received.

Informació d'exposició a RF

S'ha avaluat que el dispositiu compleix els requisits generals d'exposició a radiofreqüències. El dispositiu es pot utilitzar en condicions d'exposició sense restriccions.

Avís RSS ISED:

This device complies with Innovation, Science and Economic Development Canada licence, exemplifying RSS standard(s). Operation is subject to the following two conditions:

• Aquest dispositiu no pot causar interferències.
• Aquest dispositiu ha d'acceptar qualsevol interferència, incloses les interferències que puguin provocar un funcionament no desitjat del dispositiu.

Resolució de problemes

If the remote control is not functioning as expected:

• Comproveu les bateries: Ensure that two AAA 1.5V batteries are correctly inserted and have sufficient charge.
• Bloqueig per a nens: If the remote is unresponsive and the red light flashes for 2 seconds when a button is pressed, the child lock may be engaged. Refer to section 1.7 to disengage the child lock.
• Interferència: This device complies with FCC rules regarding interference. If you experience unexpected operation, it might be due to external interference. Ensure there are no strong radio frequency sources nearby.

Preguntes freqüents

• Com puc canviar les piles?
  The remote uses 2 x AAA 1.5V batteries. Open the battery compartment, remove the old batteries, and insert new ones, ensuring correct polarity.
• What does the ‘ZG’ button do?
  The ‘ZG’ button moves the bed to a pre-set Zero Gravity position, which is often considered an optimal position for comfort and pressure relief.
• Can I customize the ‘Favorite’ positions?
  Yes, you can memorize your preferred head and foot positions for both ‘Favorite 1’ and ‘Favorite 2’ by long-pressing the respective buttons.
• What should I do if the remote’s red light flashes when I press a button?
  If the red light flashes for 2 seconds when you press a button, it indicates that the child lock is engaged. You will need to disengage it to use the remote.
• Are there any restrictions on where I can use this device?
  This device has been evaluated for general RF exposure and can be used in portable exposure conditions without restriction.
• What if I make unauthorized changes to the equipment?
  Qualsevol canvi o modificació no aprovat expressament per la part responsable del compliment podria anul·lar l'autoritat de l'usuari per fer servir l'equip.